✔ Dynamic and Balanced Mastering with perfect Loudness Standards for your Tracks
✔ Optimized Master for Club sound system and streaming services (Spotify, Apple Music)
✔ Receive your Master within 1-3 days
✔ Unlimited Revisions till you are satisfied
✔ Promotion through Spotify or Soundcloud playlist
You can save time and nerves, and I will get the best possible quality out of your mixed Song. Do you need a warm analog sound, optimized for Streaming and download shops (Spotify, Youtube, Apple Music, Soundcloud, Beatport, Itunes)? I bring life into your Songs, with the right balance and required punchy loudness levels. You will hear the difference with my Audio Mastering Service for electronic music.
Get rid of flat muddy basslines and kick sounds that miss the punch and power. Add more value to your music productions and get this massive sound like your favorite artists.
I Remove what hurts your music and achieve that deep warm sound. If your music production is still causing you headaches, here is the right solution for you.
Do you want to close the gap between your audio productions and your favorite producers? Don't let your music career fail because of bad sound quality.
Choose this Audio Mastering Service - Click Buy Now, and I'll take care of the problematic part, to achieve a better listening experience.
Full potential - Don't regret your Audio Mastering quality anymore:
Fans will enjoy your music even more.
You will be proud of your next music release.
(Price: about €36,00 EUR / £30,50 GBP / $39,99 USD per Song)
Now it's your turn
This Techno Master is fantastic - just what I was looking for. Thanks very much. I am pretty impressed, and I will be back with more music soon.
Wow thank you very much! Corresponds exactly to my mastering ideas. The timbre and The result is top. I am 100% satisfied.
Very nice Work and I'm very happy with the master! You get the details out there and it sounds very good in the club
Thanks a lot man for your music Master ! That was exactly the sound I was looking for
I would recommend to use one of these services to send your audio files for the mastering process. After you ordered your HQ Mastering please send a download link of your song.
If you decide to take advantage of my help. Then I can get the best result if you send me a reference song for mastering. This reference song should be very similar to your music track's sound design and genre. If I orientate myself to the song, I can reach the desired goal much faster. At the end we are both happy afterwards, if your mastered song sounds like one of your favorite music productions.
Here's one of the secrets of the mixing engineers. To avoid squashing, if it doesn't sound loud enough to your ears, turn up the monitor! If you find that you've been forced to apply limiting or compression just to keep the meters from overloading, then you've been going about this backward. Instead, turn down your individual mix levels several dB and get rid of any compression you were using to "protect" the mix. Now your mix is at a lowered meter level, so turn up your monitor gain to arrive at the same loudness. But this time, it won't sound squashed. Leave the monitor at that position as you continue to mix.
When you mix a 24-bit or 32-bit recording, you can make a perfectly good mix that peaks between -3 and -6 dBFS with no loss of quality. So if the mix gets too loud by your ears, turn down the elements that are too hot in the mix, instead of turning down the monitor again, with no fear of mixing too low. In other words, a high monitor gain gives you less temptation to over compress. High monitor gain does not necessarily mean high monitor output from the speakers. It means that the mix level had to be lower. Your dynamic mix should be sitting within -3 and -6 dB before mastering. So please do not try to ruin your song in the mix stage.
Start Mixing your loudest Instrument. After that, add the other elements of your mix. Try to not exceed -3 dBFS peak on a peak meter on the highest peak of the mix. Low levels are perfectly acceptable in a 24 bit or 32 Bit System. Once you see that the highest peak is in the range of, say, -10 dBFS to -3 dBFS, then from that point on, if you can hear it, the low-level passages are ok. Preserve the dynamic range! Don't ruin the mix before the mastering process. If the mix sounds good, then soft passages automatically are not too soft. Of course, if you think a soft passage sounds too soft in the mixing, try to fix it during the mixing. But these can easily be dealt with and often more efficiently in mastering.
If you have a VU meter, use it. Use the VU, ignore the peak, and you'll start making better mixes.
The whole audio mastering process is done after 1-3 working days. You send me your mixed Track, I start to master your song, then you receive a sample of the mastered track. Next, we talk about the mastering and production process.
As a bonus, I give you advice if I think your mixing technique could be better. If I have suggestions for improving your mix, I let you know how to get a better result. If you wish a modification of the mastering, I'm here to do unlimited revisions till you are satisfied. So there is no risk because you don't have to pay if you aren't absolutely delighted.