Mastering a song Online - Proven Soundquality

 ✔ Dynamic and Balanced Mastering with perfect Loudness Standards for your Song (16 Bit .wav file & 320kbps .mp3 included)

✔ Optimized Master for Club sound systems and streaming services (Spotify, Apple Music) 

✔ Specialized in Electronic Music Mastering (Hip Hop, Techno, House)

 ✔ Receive your Master within 2-3 working days

✔ Unlimited Revisions till you are satisfied

✔ Promotion through Spotify or Soundcloud playlist

Upload your audio files via a file hoster like wetransfer.com or Google Drive, then you can use the following contact form to contact me.

1. Be sure that you leave some headroom when producing your songs. Set -3 / -6 DB as the target when mixing your music. Creating sound loudness levels is part of the mastering process. Please check that there is no compressor /limiter enabled on the master bus(the sum of your song elements)
2. Render your Song within your favorite music production software(Ableton, Cubase, FL Studio). When converting your Song as a lossless .wav file, choose 24Bit or 32Bit with 44,1khz or more.
3. During the ordering process, you get asked to add a download link to your sound file. For that purpose, I recommend using Wetransfer, Filemail, or Google Drive. Or use the Contact form to send me your download links
4. When I received your Song, I will start the mastering process as soon as possible. First, I check if everything is all right with your sound file, but then I let the magic happen. After 1-3 days, you get back your improved and mastered Song. Next, we communicate and check if you are 100% pleased with the result. If we have to change something, you have unlimited revisions - till you are delighted.
5. Get something back: If you have released your single or EP, I will support you with promotion. Here at mastrng.com, I have about 15.000 monthly visitors. I will share your Song in my Spotify or Soundcloud Playlist and promote it on social media.

Do you want to close the gap between your audio productions and your favorite producers? Don't let your music career fail because of bad sound quality. 

Choose this Dance Music Mastering Service - Click Buy Now, and I'll take care of the problematic parts to achieve a better listening experience.

The full potential for your songs, increase your sound quality now.

Fans will enjoy your music even more, and you will be proud of your next music release

I recommend to use one of these services to send your audio files for mastering 

• Wetransfer
• Fidbak
• Google Drive
• Dropbox

1 Song  - 36,99€

2 Songs - 69,99€

4 Songs - 134,99€

Currently the price for mastering one song is 39,99€. If you want to master 4 songs at once, you get a discount of 20€. Then you pay only 34,99€ per track.

If you decide to take advantage of my help. Then I can get the best result if you send me a reference song for mastering. This reference song should be very similar to your music track's sound design and genre. If I orientate myself to the song, I can reach the desired goal much faster. At the end we are both happy afterwards, if your mastered song sounds like one of your favorite music productions.

Here's one of the secrets of the mixing engineers. To avoid squashing, if it doesn't sound loud enough to your ears, turn up the monitor! If you find that you've been forced to apply limiting or compression just to keep the meters from overloading, then you've been going about this backward. Instead, turn down your individual mix levels several dB and get rid of any compression you were using to "protect" the mix. Now your mix is at a lowered meter level, so turn up your monitor gain to arrive at the same loudness. But this time, it won't sound squashed. Leave the monitor at that position as you continue to mix.

When you mix a 24-bit or 32-bit recording, you can make a perfectly good mix that peaks between -3 and -6 dBFS with no loss of quality. So if the mix gets too loud by your ears, turn down the elements that are too hot in the mix, instead of turning down the monitor again, with no fear of mixing too low. In other words, a high monitor gain gives you less temptation to over compress. High monitor gain does not necessarily mean high monitor output from the speakers. It means that the mix level had to be lower. Your dynamic mix should be sitting within -3 and -6 dB before mastering. So please do not try to ruin your song in the mix stage.

Levels:

Start Mixing your loudest Instrument. After that, add the other elements of your mix. Try to not exceed -3 dBFS peak on a peak meter on the highest peak of the mix. Low levels are perfectly acceptable in a 24 bit or 32 Bit System. Once you see that the highest peak is in the range of, say, -10 dBFS to -3 dBFS, then from that point on, if you can hear it, the low-level passages are ok. Preserve the dynamic range! Don't ruin the mix before the mastering process. If the mix sounds good, then soft passages automatically are not too soft. Of course, if you think a soft passage sounds too soft in the mixing, try to fix it during the mixing. But these can easily be dealt with and often more efficiently in mastering.

If you have a VU meter, use it. Use the VU, ignore the peak, and you'll start making better mixes.

Depth:

The stereo image and depth of your final product will be determined by your skill in mixdown at using delays, reverberation, effects, and your skills in tracking, how you tracked your instruments. Try to make a plan beforehand of how your soundstage might look, where the instruments might be placed.

The whole audio mastering process is done after 1-3 working days.  You send me your mixed Track, I start to master your song, then you receive a sample of the mastered track. Next, we talk about the mastering and production process.

As a bonus, I give you advice if I think your mixing technique could be better. If I have suggestions for improving your mix, I let you know how to get a better result. If you wish a modification of the mastering, I'm here to do unlimited revisions till you are satisfied.